Emerson Rosemount 2410 - 1.2 Introduction; 1.3 The upgrade kit; 1.3.1 Tools; 1.4 Installation procedure

3
Manual Supplement
00809-0200-2410, Rev AA
Rosemount 2410 Tank Hub
November 2015
Rosemount 2410 Tank Hub
1.2 Introduction
This instruction describes how to upgrade a Primary/Secondary Fieldbus on existing 2410
Tank Hub.
Note
The upgrade must be documented. This includes stating the serial number of the device,
date of upgrade, type of upgrade and name of the person performing the upgrade.
1.3 The upgrade kit
The modification kit consists of the following parts:
 Screw M36
 Plate for Main Label
 Main and Spare Part Label
 PCM Modem Board (if applicable)
 Start Code (if applicable)
1.3.1 Tools
The following tools are required
 A small screwdriver used for disconnecting the cables from 2410.
 A torx T-20 screwdriver for dismounting the 2410 device.
1.4 Installation procedure
When upgrading the 2410 Tank Hub, make sure to follow and observe local safety
regulations when working with electrical equipment within the hazardous locations.
Always make sure to have the necessary site permissions before starting any kind of work
within the hazardous locations. If unsure, consult the local personnel on site.