Emerson Rosemount 2410 - Invalid Temperature Measurements

Figure 5-2: Example: Holding Register Sakura_TempErrorConfig (1211) Set to Value 0
Table 5-3: User Defined Invalid Level Value
Input register Register
number
Default
value
Description
Emul_Level_ErrVal_m 1204 0 Meter part of the user defined invalid level
value.
Emul_Level_ErrVal_1_10_mm 1205 0 1/10 mm part of the user defined invalid
level value.
5.7 Invalid temperature measurements
The tank hub reply on the Sakura host temperature request can be customized if the
temperature value is invalid.
Use holding register Sakura_TempErrorConfig (1212) to customize your reply
configuration, see Table 5-4. This configuration is applicable on all tank positions.
Manual Supplement Optional configuration and settings
00809-0800-2410 August2023
Emerson.com/Rosemount 23