Emerson Rosemount 2410 - Rosemount 2410 Tank Hub Communication

1.3 Rosemount 2410 Tank Hub communication
The tank hub has slots for two independent communication boards, primary and
secondary field bus, for TRL2 Modbus
®
, RS485 Modbus, emulation, or wireless
communication.
Support for Sakura emulation is selected in the model code, refer to Rosemount 2410
Product Data Sheet for more information. There are two alternatives available for Sakura
emulation:
• Example 1: Sakura MDP/V1 on secondary bus
Sakura is available on the secondary bus, where the primary bus can be used for
regular TRL2 or RS485 communication.
• Example 2: Wireless communication in combination with Sakura emulation
Sakura is available on the primary bus, where the secondary bus is used for
WirelessHART
®
for normal communication.
Example 1: Sakura MDP/V1 on secondary bus
The Sakura MDP/V1 interface is connected to the Rosemount 2410 secondary field bus.
Configuration is usually performed with a FBM connected to the primary bus. The primary
bus can be used for regular TRL2 or RS485 Modbus communication.
Figure 1-3: Configuration on Primary Bus and Emulation on Secondary Bus
A B
C
D
E
F
A. Primary bus: TRL2 Modbus
B. Secondary bus: Sakura MDP/V1
C. FBM
D. Rosemount TankMaster
™
PC
E. Sakura converter
F. Sakura host
Introduction Manual Supplement
August2023 00809-0800-2410
8 Emerson.com/Rosemount