Emerson Rosemount 2460 System Hub - Manual Switch over

101
Reference Manual
00809-0100-2460, Rev DE
Operation
October 2018
Operation
5.4.3 Manual switch over
The Rosemount 2460 System Hubs can be manually switched over from Active to Passive device.
Using TankMaster WinSetup
The Manual Switch Over button may be used to test that both the Primary and Backup Rosemount
2460 System Hubs function properly as Active or Passive device. It may also be used to reset the devices
in case a Fail-over has occurred.
1. In the WinSetup workspace, right click the Rosemount 2460 icon.
2. Choose the Properties option and select the Redundancy tab.
3. Click the Manual Switch Over button.
4. Verify that the Active device switched to Passive and vice versa.