144
Reference Manual
00809-0100-2460, Rev DE
Service and Troubleshooting
October 2018
Service and Troubleshooting
6.23.2 Software write protection
The current write protection status can be viewed in the Rosemount 2460 Web Interface.
1. Open and log in to the Web Interface as described in “Using the web interface” on page 114.
2. Select the Overview tab.
3. Enable or disable software write protection by choosing the desired option from the drop-down list.
Note that in case the Rosemount 2460 is hardware write protected, the current SW write protection
can not be changed.
To Next Page
Loading...
