174
Enraf
®
Device Configuration
Enraf
®
Device Configuration
October 2018
Reference Manual
00809-0100-2460, Rev DE
C.2 Advanced Enraf configuration
This section describes how to enable and configure Fast Polling for Enraf devices. Fast polling can be used
to increase the sampling rate for tanks with level rates above a certain threshold value.
A general threshold setting can be configured which applies for all servo tanks. It is also possible to
configure threshold values for individual servo tanks.
C.2.1 Fast polling
See Appendix G: Fast Polling for information on how to setup fast polling for Enraf
®
devices.
C.2.2 Configure Vapor Temperature
1. Open TankMaster WinSetup.
2. In the WinSetup workspace, click the right mouse button on the 2460 icon and choose Properties.
3. Select the Tank Database tab.
4. Click the Advanced button for the desired tank to open the Enraf Configuration window.
5. The Enraf Configuration window lets you configure Vapor Temperature for the selected tank.
6. Click OK to save the current configuration and close the window.
Advanced buttonEnraf device
To Next Page
Loading...
