Emerson Rosemount 2460 System Hub - Tank Database Configuration

209
L&J Device Configuration
L&J Device Configuration
October 2018
Reference Manual
00809-0100-2460, Rev DE
Appendix H L&J Device Configuration
Tank Database configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 209
Advanced L&J configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 212
H.1 Tank Database configuration
This section describes how to configure the Tank Database of the Rosemount
™
2460 System Hub for
supported L&J devices. See also “L&J” on page 151 for information on hardware.
1. In TankMaster WinSetup right-click the Rosemount 2460 System Hub that the device is connected to
and choose Properties.
2. Select the Tank Database tab.
Tank Database