Emerson Rosemount 2460 System Hub - Advanced L&J Configuration; Fast Polling

212
L&J Device Configuration
L&J Device Configuration
October 2018
Reference Manual
00809-0100-2460, Rev DE
H.2 Advanced L&J configuration
This section describes advanced configuration options for supported L&J devices.
H.2.1 Fast polling
See Appendix G: Fast Polling for information on how to setup fast polling.
H.2.2 Advanced L&J configuration
1. Open the TankMaster WinSetup program.
2. In the WinSetup workspace, click the right mouse button on the Rosemount 2460 icon and choose
Properties.
3. Select the Tank Database tab.
4. For the desired tank position with L&J device, press the Advanced button to open the
L&J Configuration window:
5. The L&J Configuration window lets you configure advanced options for the selected device.
6. Press OK to save the current configuration and close the configuration window.
Option Description
Inverse Temperature Sign This option shifts sign for Average Liquid Temperature values.
Use this option to match host system standards.
Swap Interface and Pressure This option shifts interface and pressure data.
Use this option to match host system standards.
No Response If Invalid Level This option prevents invalid level data to result in communication failure
(CFail) error message.
Advanced button
L&J device