220
Enraf
®
858 CIU Configuration
Enraf
®
858 CIU Configuration
October 2018
Reference Manual
00809-0100-2460, Rev DE
J.2 Getting started
To setup the Rosemount 2460 System Hub for Enraf 858 CIU emulation:
1. Open the Rosemount TankMaster WinSetup configuration program.
2. Ensure that the Rosemount 2460 is properly installed
(1)
and appear in the WinSetup workspace as
illustrated below.
3. Click the right mouse button and select Properties.
4. Select the Configuration tab and configure the appropriate Host Port, see “Host port configuration”
on page 221.
1. See Section 4: Configuration for more information on how to setup the Rosemount 2460 System Hub.
To Next Page
Loading...
