222
Enraf
®
858 CIU Configuration
Enraf
®
858 CIU Configuration
October 2018
Reference Manual
00809-0100-2460, Rev DE
6. In the Advanced Port Configuration window, choose Protocol Enraf GPU.
7. In the Port Configuration pane, set communication parameters such as Baud Rate to the same as the
Enraf host.
8. In the Address Mask field, click the button and select the desired Enraf CIU addresses. The
system hub only replies on selected addresses. A Rosemount 2460 may replace two Enraf CIU 858
with 30 devices each.
9. Click the Units button to set the appropriate Enraf measurement units. Auto is the default setting. In
Auto mode Enraf units will be the same as the system hub units. It is recommeded to select the Enraf
units manually.
To Next Page
Loading...
