9
Reference Manual
00809-0100-4825, Rev CB
Section 2: Installation
March 2014
Installation
2.2 Mounting
Mount the transmitter at a high point in the conduit run to prevent moisture from draining into
the transmitter housing.
The Rosemount 248R installs directly to a wall or to a DIN rail.
The Rosemount 248H installs:
In a connection head or universal head mounted directly on a sensor assembly
Apart from a sensor assembly using a universal head
To a DIN rail using an optional mounting clip
Mounting a Rosemount 248H to a DIN rail
To attach a head mount transmitter to a DIN rail, assemble the appropriate rail mounting kit
(part number 00248-1601-0001) to the transmitter as shown in Figure 2-2.
Figure 2-2. Assembling Rail Clip Hardware to a Rosemount 248
A. Mounting hardware
B. Transmitter
C. Rail clip
To Next Page
Loading...
