Emerson Rosemount 3051S MultiVariable - Signal Termination

2.4 Flow configuration
2.4.1 Rosemount 3051SMV Engineering Assistant 6.3 or later
The Rosemount 3051SMV Engineering Assistant is designed to guide the user through the
setup of the flow configuration of a Rosemount 3051SMV. The flow configuration screens
allow the user to specify the fluid, operating conditions, and information about the
primary element including the inside pipe diameter. This information will be used by the
Rosemount 3051SMV Engineering Assistant to create the flow configuration parameters
that can be sent to the transmitter or saved for future use.
NOTICE
To ensure correct operation, download the most current version of the Engineering
Assistant software at Emerson.com/en-us/catalog/rosemount-engineering-assistant-6.
Figure 2-2 shows the path in which the Rosemount 3051SMV Engineering Assistant will
guide the user through a flow configuration. If a natural gas, custom liquid, or custom gas
option is chosen, an extra screen will be provided to specify the gas composition or fluid
properties.
Figure 2-2: Flow Configuration Flowchart
Start
Process fluid
selection
Natural gas Custom liquid
Custom gas
Custom gas or
custom liquid
fluid properties
Natural gas
composition
Fluid properties
(optional)
Database liquid
Database gas or
steam
Primary
element
selection
Save/Send
flow
configuration
Ideal gas
Configuration Reference Manual
October 2018 00809-0100-4803
12 Rosemount 3051S Multivariable Transmitter