Emerson Rosemount 3051S MultiVariable - Rotate the LCD Display

1 Introduction
1.1 Using this manual
The sections in this manual provide information on installing, operating, and maintaining
the Rosemount
™
3051S MultiVariable
™
Transmitter (Rosemount 3051SMV). The sections
are organized as follows:
• Configuration provides instruction on commissioning and operating Rosemount
3051SMV. Information on software functions, configuration parameters, and online
variables is also included.
• Installation contains mechanical and electrical installation instructions.
• Operation and Maintenance contains operation and maintenance techniques.
• Troubleshooting provides troubleshooting techniques for the most common operating
problems.
• Safety Instrumented Systems Requirements contains identification, commissioning,
maintenance, and operations information for the Rosemount 3051S MultiVariable
Safety Instrumented System (SIS) Safety Transmitter.
• Specifications and Reference Data supplies reference and specification data, as well as
ordering information.
• Contains intrinsic safety approval information, European ATEX directive information,
and approval drawings.
1.1.1
Models covered
The following Rosemount 3051SMV Transmitters are covered in this manual:
Table 1-1: Rosemount 3051SMV Measurement with Fully Compensated Mass and
Energy Flow Output
Measurement type Multivariable type - M
1 Differential pressure, static pressure, temperature
2 Differential pressure and static pressure
3 Differential pressure and temperature
4 Differential pressure
Table 1-2: Rosemount 3051SMV Measurement with Direct Process Variable Output
Measurement type Multivariable type - P
1 Differential pressure, static pressure, temperature
2 Differential pressure and static pressure
3 Differential pressure and temperature
5 Coplanar static pressure and temperature
6 In-line static pressure and temperature
Reference Manual Introduction
00809-0100-4803 October 2018
Emerson.com/Rosemount 7