Emerson Rosemount 3051S MultiVariable - Page 99

The manifold is now in the proper configuration for zeroing the transmitter.
A. (Plugged)
B. Isolate (open)
C. Process
D. Equalize (open)
E. Equalize (open)
F. Drain vent (closed)
G. Process
H. Isolate (closed)
I. (Plugged)
4. After zeroing the transmitter, close the equalize valve on the low pressure
(downstream) side of the transmitter.
Reference Manual
Installation
00809-0100-4803 October 2018
Emerson.com/Rosemount 99