7 Flow configuration
Rosemount 3051SMV Engineering Assistant 6.1 or later
The Rosemount 3051SMV Engineering Assistant is designed to guide
the user through the setup of the flow configuration for a Rosemount
3051SMV. The flow configuration screens allow the user to specify
the fluid, operating conditions, and information about the primary
element, including inside pipe diameter. This information will be used
by the Rosemount 3051SMV Engineering Assistant software to create
flow configuration parameters that will be sent to the transmitter or
saved for future use.
Online and offline modes
The Engineering Assistant software can be used in two modes: Online
and Offline. In Online mode, the user can receive the configuration
from the transmitter, edit the configuration, send the changed
configuration to the transmitter, or save the configuration to a file.
In Offline mode, the user can create a new flow configuration and
save the configuration to a file or open and modify an existing file.
The following pages provide instructions on creating a new flow
configuration in offline mode. For more information on other
functionality, see the Rosemount 3051SMV Reference Manual.
Quick Start Guide January2024
22 Emerson.com/Rosemount
To Next Page
Loading...
