7.1 Basic navigation overview
Figure 7-1: Engineering Assistant Basic Navigation Overview
Screen component Description of use
A The navigation tabs contain the flow configuration
information. In Offline mode, each tab will not
become active until the required fields on the
previous tab are completed. In Online mode,
these tabs will be functional at all times.
B The Reset button will return each field within all
of the flow configuration tabs (Fluid Selection,
Fluid Properties, and Primary Element Selection)
to the values initially displayed at the start of the
configuration.
• In Online mode, the values will return to the
initial values received from the device before
the start of the configuration.
• If editing a previously saved flow
configuration, the values will return to those
that were last saved. If starting a new
flow configuration, all entered values will be
erased.
C The Back button is used to step backward through
the flow configuration tabs.
January2024 Quick Start Guide
Quick Start Guide 23
To Next Page
Loading...
