Reference Manual
00809-0100-4811, Rev CA
February 2006
Rosemount 3300 Series
4-16
Using the Setup Wizard To install a 3300 transmitter by using the installation Wizard do the following:
Figure 4-9. RCT workspace
Figure 4-10. RCT Wizard
1. Start the RCT software.
2. In the RCT workspace click the
Wizard icon (make sure that the
Basic section is open),
or
choose the View>Wizard menu
option.
Basic
Wizard
RCT1
3. Click the Start button and follow the
instructions. Now you will be guided
through a number of dialogs
allowing you to configure the
transmitter.
WIZARD WELCOME
To Next Page
Loading...
