2 Troubleshooting
2.1 Meter status alarms
Run MeterLink and open the Meter Monitor (Summary) view to perform a
diagnostics health check.
Figure 2-1: Meter Monitor status alarms
If the meter is measuring flow and operating within the calibration parameters
the Meter Status LED is green. If the Meter Status LED is red, an active alarm
exists that requires you to take corrective action. Click the Check Status button
to display the Status Summary screen. The alarms are shown with the primary
causes listed first. Click the question mark, , next to the alarm to display a help
topic related to the alarm and recommended actions to resolve the issue.
Figure 2-2: Status Summary
Maintenance and Troubleshooting Manual Troubleshooting
00809-0100-3814 January2023
Rosemount 3814 Liquid Ultrasonic Flow Meter 13
To Next Page
Loading...
