14. Adjust the security wire, removing all slack and thread into the lead seal.
15. Cut wire ends to remove excess wire.
16. Apply conduit sealing compound according to manufacturer’s
recommendations.
17. Apply power to the meter.
This completes the Acquisition Module replacement procedure.
If you encounter problems with this procedure, see the Emerson Customer
Support contact information in Emerson website: www.emerson.com
Maintenance and Troubleshooting Manual Meter maintenance
00809-0100-3814 January2023
Rosemount 3814 Liquid Ultrasonic Flow Meter 75
To Next Page
Loading...
