If only Rosemount Radar Master is connected to the bus:
• Device address = Fixed
• Device Type = Link Master Device
• Usage = NI-FBUS
If other host systems are connected to the bus:
• Device address = Visitor
• Device Type = Basic Device
• Usage = NI-FBUS
2. Click the Start button, and then select All Programs → Rosemount → Rosemount
Radar Master or click the RRM icon in the Windows workspace.
3. If the National Instruments Communication Manager server is not running, select
Yes when RRM displays a request for starting the server.
4. If the Search Device window did not appear automatically, then select Device →
Search.
5. In the Search Device window, choose communication protocol FOUNDATION Fieldbus
(if not already selected).
6. If you want to specify start and stop address, then select Advanced.
7. Select Start Scan. Now RRM searches for the transmitter.
After a while RRM shows the transmitters found on the bus.
Configuration Reference Manual
April 2019 00809-0100-4530
126 Rosemount 5300 Level Transmitter
To Next Page
Loading...
