Emerson Rosemount 5300 Series - View Measurement Data

6.4 View measurement data
Measurement values can be viewed using Rosemount Radar Master, AMS Device Manager,
handheld communicator, or other communicator.
6.4.1 View measurement data in Rosemount Radar Master
To view measurement data in Rosemount Radar Master:
Procedure
1. Select Tools → Device Display.
2. Select the desired group of measurement values to view.
• To view measurement data such as level, signal strength, etc., select the Level
tab.
• To view the analog output signal, select the Analog Out tab.
• To view signal quality and surface/noise margin, select the Signal Quality
Metrics tab.
Figure 6-2: Presentation of Measurement Data in Rosemount Radar Master
Reference Manual Operation
00809-0100-4530 April 2019
Reference Manual 165