Figure 7-9: The Echo Curve Function Is a Useful Tool for Signal Analysis
A. Device Config
B. Tools
The Echo Curve Analyzer window appears with the View/Record Mode tab (or the
Configuration Mode tab) selected.
The configuration mode tab
The Configuration Mode tab lets you adjust the different amplitude thresholds. When
clicking the Echo Curve icon under Device Config/Setup, the Echo Curve Analyzer window
appears with the Configuration Mode tab selected.
See the Rosemount Radar Master online-help for descriptions of the various display
options in the Echo Curve Analyzer window.
Note
By manually changing the amplitude thresholds in the Echo Curve plot, the Automatic
mode is disabled for the corresponding threshold (see Adjusting thresholds for more
information on how to adjust the amplitude thresholds).
Service and troubleshooting Reference Manual
April 2019 00809-0100-4530
196 Rosemount 5300 Level Transmitter
To Next Page
Loading...
