EasyManua.ls Logo

Emerson Rosemount 5300 Series - Page 443

Emerson Rosemount 5300 Series
488 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table H-1: Advanced Configuration Transducer Block Parameters (continued)
Parameter Index Number Description
SW_SUPPORT2 34 Defines what options are enabled in the device.
USED_HOLD_OFF_DIST 35 The Hold Off Distance/Upper Null Zone currently used in the device.
USED_PEP_PRODUCT_DC 36 Product Dielectric currently used in the device.
START_CODE 37 This code determines what options are available in your device. Do not
change your Start Code unless you have received a valid one. Use Enter
Start Codes method to change it.
UNIT_CODE 38 Unit code 1 -4 can be sent to your local Emerson
representative in
order to receive new Start Codes for upgrading your device.
ENV_SET_START_CODE 39 Set Start Code
PROBE_END_ANCHORING 40
PEP_PROBE_END_OFFSET 41
USED_PEP_
PROBE_END_OFFSET
42
VOL_VOLUME_CALC_MET
HOD
43 Choose what kind of volume calculation method to use.
VOL_IDEAL_DIAMETER 44 Diameter of the tank (only for ideal tank shapes).
VOL_IDEAL_LENGTH 45 Length/height of the tank (only for ideal tank shapes).
VOL_VOLUME_OFFSET 46 Use this parameter to add a volume to each calculated volume value.
The volume can for instance correspond to a sump volume that you
wish to add to your calculation.
VOL_STRAP_TABLE_LENGT
H
47 Number of points to use in the strapping table.
VOL_STRAP_LEVEL 48 Strap value level 1-20 points
VOL_STRAP_VOLUME 49 Strap value volume 1-20 points
ECHO_REG 50 Read Echo distance, amplitude and class from gauge. The Echo
Distance is the distance from the reference echo to the target echo
calculated by the radar from the plot and gauge configuration.
ECHO_WRITE 51 Echo Found/False Record
PEP_STATUS 52 Probe End Projection Status
PEP_PRODUCT_DC_LIMIT 53 Probe End Projection Dielectric Constant Limit
PROBE_END_PULSE_POLA
RITY
54
USED_MAX_VAPOR_DC 55
REF_REFLECTOR_TYPE 56 Reference Reflector Type
VAPOR_DC_FILTER_FACT
OR
57 Vapor Dielectric Constant Filter Factor
SIGNAL_QUALITY 58
MIN_SIGNAL_QUALITY 59
Reference Manual Advanced Configuration Transducer Block
00809-0100-4530 April 2019
Reference Manual 443

Table of Contents

Other manuals for Emerson Rosemount 5300 Series

Related product manuals