2. Insert the centering piece.
The centering piece is delivered from factory and should be used to prevent the
spacers centering the rod from coming loose.
3. Cut the tube to the desired length.
4. Move the centering piece.
5. Cut the rod inside the tube. Make sure the rod is fixed with the centering piece while
cutting.
Postrequisites
After shortening the probe make sure to update the transmitter configuration to the new
probe length.
Related information
Probe length
3.3.5
Shorten the large coaxial probe
Related information
Probe length
Mechanical installation Reference Manual
April 2019 00809-0100-4530
50 Rosemount 5300 Level Transmitter
To Next Page
Loading...
