5. Mount the transmitter head.
60 mm
Torque 30 ft-lb (40 Nm)
Postrequisites
Connect the wiring.
3.5.3
Threaded tank connection
Prerequisites
Note
PTFE covered probes must be handled carefully to prevent damage to the coating.
Procedure
1. For adapters with BSPP (G) threads, place a suitable gasket on top of the tank
flange.
2. For adapters with NPT threads, use anti-seize paste or PTFE tape according to your
site procedures.
Reference Manual Mechanical installation
00809-0100-4530 April 2019
Reference Manual 71
To Next Page
Loading...
