150
Reference Manual
00809-0100-4026, Rev HA
Section 7: Service and Troubleshooting
November 2014
Service and Troubleshooting
7.11 Surface search
The Surface Search command triggers a search for the product surface and can be used, for
example, if the measured level is locked onto a disturbing object in the tank (see “Configuration
report” on page 147).
AMS and DeltaV
1. In the AMS and DeltaV explorer select Configure/Manual setup, choose the Echo
Tuning tab, and select Search for Surface.
2. Choose the Surface Search option.
Search for Surface
To Next Page
Loading...
