September 2016
8
Quick Start Guide
7. Remove one of the four housing base screws.
8. Attach and securely tighten the coaxial cable nut to the connection on the
electronics housing.
9. Attach the coaxial cable ground wire to the housing via the housing base
ground screw.
10. Align the housing adapter with the housing and attach with two screws.
11. Tighten the conduit adapter or cable gland to the housing adapter.
To prevent moisture from entering the coaxial cable connections, install the interconnecting coaxial cable in
a single dedicated conduit run or use sealed cable glands at both ends of the cable.
To Next Page
Loading...
