Implementing a Universal Transmitter
March 2016
Reference Manual
00809-0300-4750, Rev CA
225
Implementing a Universal Transmitter
D.2 Rosemount sensors
D.2.1 Rosemount 8750W Sensors to transmitter
Connect coil drive and electrode cables as shown in Figure D-1 on page 225.
Figure D-1. Wiring to a Rosemount 8750W Transmitter
Table D-2. Rosemount 875W Sensor Wiring Connections
Rosemount 8750W Transmitters Rosemount 8750W Sensors
1 1
2 2
3 3
17 17
18 18
19 19
Do not connect mains or line power to the magnetic flowtube sensor or to
the transmitter coil excitation circuit.