4.2 Transmitter symbols
Caution symbol — check product
documentation for details
Protective conductor (grounding) terminal
4.3 Mounting
Wall mount transmitters are shipped with mounting hardware for use on a 2 inch (50 mm)
pipe or flat surface.
Figure 4-2: Mounting bracket
A
A
B
B
B
B
A. U-bolt
B. Fasteners
4.3.1
Pipe mounting
1. Assemble the hardware and transmitter housing on the pole as shown in Figure 4-2.
2. Tighten the nuts to ensure a snug fit.
Remote Transmitter Installation Reference Manual
November 2019 00809-0100-8782
28 Rosemount
®
8782 Slurry Magnetic Flow Meter Transmitter with HART Protocol
To Next Page
Loading...
