64
Reference Manual
00809-0100-4772, Rev FA
Transducer Block
March 2016
Transducer Block
Sim disable
Sim Disable allows you to exit the flow simulation mode (internal or external) and return
you to normal operation mode.
Sim - internal generator
The Sim - Internal Generator function will automatically disconnect the sensor and enable
you to select the configuration of the internal simulate (fixed or varied).
Sim - external generator
Sim - External Generator flow allows you to disconnect the sensor electronically so an
external frequency source can be used.
Simulation units
The flow simulation can be performed as either a percent of range or flow rate in current
engineering units.
Simulation ramp period
The Simulation Ramp period can be entered in seconds from a minimum of 0.5 seconds to a
maximum of 32,000 seconds.
To Next Page
Loading...
