Note
Transmitters marked with NI CL 1, DIV 2 can be installed in Division 2 locations
using general Division 2 wiring methods or Nonincendive Field Wiring (NIFW).
See Drawing 03151-1206.
IE US FISCO Intrinsically Safe
Certificate
FM16US0233
Standards
FM Class 3600 – 2011, FM Class 3610 – 2010, FM Class 3611 –
2004, FM Class 3616 – 2006, FM Class 3810 – 2005, NEMA 250
– 1991
Markings
IS CL I, DIV 1, GP A, B, C, D;
Standards
T4(–50 °C ≤ T
a
≤ +70 °C); when connected per Rosemount
drawing 03151-1006; Type 4X
10.1.2 Canada
E6 Canada Explosionproof, Dust Ignition-proof, Division 2
Certificate
1143113
Standards
CAN/CSA C22.2 No. 0-10, CSA Std C22.2 No. 25-1966, CSA Std
C22.2 No. 30-M1986, CSA C22.2 No. 94.2-07, CSA Std C22.2
No. 213-M1987, CAN/CSA C22.2 60079-11:14, CAN/CSA-C22.2
No. 61010-1-12, ANSI/ISA 12.27.01-2003, CSA Std C22.2 No.
60529:05 (R2010)
Markings
Explosionproof Class I, Division 1, Groups B, C, D; Dust-
Ignitionproof Class II, Division 1, Groups E, F, G; Class III; suitable
for Class I, Division 2, Groups A, B, C, D; Type 4X
I6 Canada Intrinsically Safe
Certificate
1143113
Standards
CAN/CSA C22.2 No. 0-10, CSA Std C22.2 No. 25-1966, CSA Std
C22.2 No. 30-M1986, CSA C22.2 No. 94.2-07, CSA Std C22.2
No. 213-M1987, CAN/CSA C22.2 60079-11:14, CAN/CSA-C22.2
No. 61010-1-12, ANSI/ISA 12.27.01-2003, CSA Std C22.2 No.
60529:05 (R2010)
Markings
Intrinsically Safe Class I, Division 1; suitable for Class 1, Zone 0,
IIC, T3C, Ta = 70 °C; when connected per Rosemount drawing
03151-1207; Type 4X
IF Canada FISCO Intrinsically Safe
Certificate
1143113
October 2018 Quick Start Guide
Quick Start Guide 33
To Next Page
Loading...
