EasyManua.ls Logo

Emerson Rosemount OCX 8800 - Page 297

Emerson Rosemount OCX 8800
300 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EU Declaration of Conformity
(No. 1700914)
OCX88A, OCX88C
This declaration is issued under the sole responsibility of the manufacturer:
Rosemount Inc., 8200 Market Blvd., Chanhassen, MN 55317 USA
The product,
Rosemount OCX 8800 Oxygen / Combustibles Transmitters, Models OCX88A & OCX88C
to which this declaration relates, is in conformity with relevant Union harmonization legislation:
(2014/30/EU) EMC Directive
(2014/35/EU) Low Voltage Directive
(2014/68/EU) Pressure Equipment Directive
This equipment has been designed and manufactured with sound engineering practices in accordance with Article
4, Paragraph 3 of the PED
(2014/34/EU) ATEX Directive (Model OCX88C)
Provisions of the directive fulfilled by the equipment:
Equipment Group II, Category 2 G Ex d IIB+H2 T6 Gb -40°C ≤ Ta ≤ +65°C Split Architecture Electronics Assy.
T3 Gb -40°C ≤ Ta ≤ +100°C Split Architecture Sensor Assy.
T3 Gb -40°C ≤ Ta ≤ +65°C Integral Version
EC Type Examination Certificate: KEMA 04ATEX2308
EC-Type Examination Certificate issued by DEKRA [Notified Body Number:0344], Certification B.V.
Meander 1051, 6825 MJ Arnhem, The Netherlands
Product Quality Assessment Notification issued by SGS Baseefa (1180), Rockhead Business Park, Staden
Lane, Buxton
SK17 9RZ United Kingdom
Assumption of conformity is based on the application of the harmonized standards:
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use. EMC
requirements. General requirements
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control,
and laboratory use. General requirements
EN 60079-0:2012+A11:2013 Explosive atmospheres. Equipment. General requirements. (Certified to
60079-0:2012, meets /A11:2013 which does not have any major technical
change)
EN 60079-1:2007 Explosive atmospheres. Equipment protection by flameproof enclosures
"d"
_______________________ Vice President Global Quality, Engineering, & Approvals
(Signature) (Function name)
Chris LaPoint July 1, 2017
(Name printed) (Date of issue)
CE marking was first affixed to this product in 2005

Table of Contents

Related product manuals