Emerson Rosemount OCX8800 - Simulation; Figure 7-6 Analog Input Function Block Schematic

Instruction Manual
IM-106-880C, OI
Section 7: Foundation
Fieldbus
April 2017
7.11.2 Simulation
To support testing, you can either change the mode of the block to manual and adjust the
output value, or you can enable simulation through the configuration tool and manually enter a
value for the measurement value and its status.
With simulation enabled, the actual measurement value has no impact on the OUT value or the
status.
Figure 7-6 Analog Input Function Block Schematic
Simulation 117