Emerson Rosemount SOLU COMP II - Factory Reset and Default Settings

31
MODEL SOLU COMP II SECTION 5.0
PROGRAMMING THE ANALYZER
5.9 RESETTING FACTORY CALIBRATION AND FACTORY DEFAULT SETTINGS
5.9.1 Purpose.
This section describes how to re-install factory calibration and default values. The process also clears all fault mes-
sages and returns the display to the first quick start screen.
5.9.2. Procedure.
To choose a menu item, move the cursor to the item and press ENTER.
To store a number or setting, press ENTER.
1. Press MENU. The main menu screen appears. Choose Program.
2. Choose >>.
3. Choose >>.
4. Choose ResetAnalyzer.
5.
Choose Yes or No. If Yes is selected, previous settings are cleared and
the Quick Start Menu appears.
Noise Rejection
ResetAnalyzer >>
Load factory
settings?
YYeess
No
OOuuttppuuttss
Alarms
Measurement >>
TTeemmpp
Security
>>
Calibrate Hold
PPrrooggrraamm
Display