Emerson Rosemount SOLU COMP II - Display, Language, and Contrast Settings

32
MODEL SOLU COMP II SECTION 5.0
PROGRAMMING THE ANALYZER
5.10.2 Procedure: Changing Screen Contrast
1. Press MENU. The main menu screen appears. Choose Display.
2. Choose Contrst.
3. Press or to increase or decrease the screen contrast. As contrast
increases, the number increases.
4. The display returns to the screen shown in step 2. To return to the main
menu, press MENU. To return to the main display, press MENU followed
by EXIT.
Calibrate Hold
Program
DDiissppllaayy
Default Display
Units
CCoonnttrrsstt
Screen Contrast:
5500
5.10.2 Procedure: Selecting a Display Screen
1. Press MENU. The main menu screen appears. Choose Display.
2. Choose Default Display.
3. Press or until the desired display appears. Press ENTER.
4. The display returns to the screen in step 2. To return to the main menu,
press MENU. To return to the main display, press MENU followed by
EXIT.
Calibrate Hold
Program
DDiissppllaayy
DDeeffaauulltt DDiissppllaayy
Language Contrst
5.10.3 Procedure: Choosing a Language
1. Press MENU. The main menu screen appears. Choose Display.
2. Choose Language.
3. Choose English, Français, Español, Deutsch, Italiano, or Portugues.
4. The display returns to the screen in step 2. To return to the main menu,
press MENU. To return to the main display, press MENU followed by
EXIT.
Calibrate Hold
Program
DDiissppllaayy
Default Display
LLaanngguuaaggee
Contrast
EEnngglliisshh
Fran ais
Espa ol >>
To choose a menu item, move the cursor to the item and press ENTER.
To store a number or setting, press ENTER.
5.10 SELECTING A DEFAULT SCREEN, LANGUAGE, AND SCREEN CONTRAST
5.10.1 Purpose
This section describes how to do the following:
1. set a default display screen (The default display screen is the screen shown during normal operation.)
2. select a language
3. change the screen contrast