MODEL SOLU COMP II SECTION 7.0
MAINTENANCE
Location in Shipping
Figure 7-2 PN Description Weight
1 note Screw, 6-32 x 1.38 in.
2 note Washer
3 23834-00 Enclosure, front, for pipe/surface mount version, 2 lb/1.0 kg
includes keypad and hinge
4 33655-00 Gasket for pipe/surface mount version 2 lb/1.0 kg
5 note Screw, 2-56 x 0.187 in., with integral washer
6 23822-00 Display board, LCD 2 lb/1.0 kg
7 note PCB, microprocessor
8 note Self-tapping screw, #4 x 0.375 in.
9 note PCB, power supply, 115/230 Vac or 24 Vdc
10 note Screw, 4-40 x 0.31 in., with integral washer
11 23836-00 Enclosure, rear, for pipe/surface mount version, 3 lb/1.5 kg
includes standoffs and hinge brackets
not shown 23833-00 Surface mount kit; consists of four self-tapping 1 lb/0.5 kg
screws #6 x 1.75 in. and four O-rings
TABLE 7-2. Replacement Parts for Solu Comp II (Pipe/Surface Mount Version)
FIGURE 7-2. Exploded View of Solu Comp II (Pipe/Surface Mount Version)
Note: Information about circuit boards and size of screws and washers is for information only. Circuit boards (other than the dis-
play board) and screws and washers cannot be purchased from Rosemount Analytical.
Shipping weights are rounded up to the nearest whole lb or 0.5 kg.
40
To Next Page
Loading...
