X-STREAM
5-9
Instruction Manual
HASAxE-IM-HS
05/2006
Emerson Process Management GmbH & Co. OHG
5 User Interface
5-3-6 Special Screens
Depending on the latest operator action one
of the following message screens (may)
appear to support or inform the operator (the
two confirmation screens automatically
disappear after a few seconds):
Command cancellation confirmation:
Confirms a procedure (e.g. calibration) has
been cancelled.
(i)
-CANCELLED-
Command execution confirmation:
Confirms a procedure (e.g. calibration) has
been started.
(i)
-COMMAND EXECUTED-
5-3 Software
Input value overflow information:
The value entered by the operator exceeds the
allowed input range. The screen shows the
input range.
Return to the previous screen where the wrong
value has been entered by pressing to enter
an acceptable value.
(i) Wrong input (i)
Min: 500
Max: 10.000
(i) Press
To Next Page
Loading...
