Emerson Rosemount5081 - Menu System; Overview of Main Menus

Infrared remote control (IRC) functionsFigure 5-3:
1. RESET
• End current operation and return to
the main display.
• Changes are not saved.
• Does not return the transmitter to
factory default settings.
6. HOLD
• Access to turn hold readings on or
off.
2. Editing (arrow) keys
• Change values of a flashing display.
• Left and right arrows move the cur-
sor by one digit.
• Up and down arrows increase or de-
crease the values and navigate
through the display options.
7. ENTER
• Advance to the next prompt.
• Store selected item.
• Store value in memory.
3. CAL
• Access to Calibration menu.
8. NEXT
• Advance to the next sub-menu.
4. PROG
• Access to Program menu.
9. EXIT
• End current operation.
• Return to the first prompt in the
present sub-menu.
• Changes are not saved.
5. DIAG
• Access to diagnostics.
5.3 Menu system
5.3.1 Overview of main menus
There are three main menus: Calibrate, Program, and Diagnose. Calibrate and Program
menus have additional sub-menus as shown in the figures below.
Program menuTable 5-1:
Displayed item Definition
OUtpUt Current output menu header
Display and operation
Instruction Manual 21