RSTi-OM User Manual Section 3
GFK-3212A Jun 2021
Configuring 34
SIO Digital In/Out Module Parameters
Additional IO-Link port settings can be configured by using module parameters.
To configure the SIO Digital In
1. Navigate to the Settings tab and enter the IO-Link Input Data value seen in Figure 29
Figure 29: Settings
2. Navigate to the SIO Digital In Config tab and match the values seen in Figure 30.
Figure 30: SIO Digital In Config
3. Navigate to the GSDML Details tab. This tab provides details of the sub-module.
Figure 31: GSDML Details
To Next Page
Loading...
