RSTi-OM User Manual Section 3
GFK-3212A Jun 2021
Configuring 35
To configure the SIO Digital Out, please visit the tabs in the following figures and match the
parameter values.
1. Navigate to the Settings tab. Match the parameter value see in the IO-Link Output data (Figure
32).
Figure 32: Settings tab
2. Navigate to the SIO Digital Output Config. Match the values for Invert IO and Default Digital
Output (Figure 33).
Figure 33: SIO Digital Output Config
3. Navigate to the GSDML Details tab. This tab provides details of the sub-module.
Figure 34: GSDMLDetails
To Next Page
Loading...
