Emerson RSTi-OM - Page 43

RSTi-OM User Manual Section 3
GFK-3212A Jun 2021
Configuring 42
IO-LINK Settings Page
PDO Length (0-32)
This is the input length of the PDO data field.
This is required if you select a Data Validation Mode other than
None.
The PDO Length can be manually entered in this field or click the
GET ATTACHED
button and the IO-Link Master populates the PDO length in this field
GET ATTACHED
(Button)
After opening a port for editing, you can click the GET ATTACHED
button to automatically populate the following fields with data
from the IO-Link device:
Vendor Id
Device Id
Serial Num
PDI Length
PDO Length