Emerson RSTi-OM - Updating the IOLM Firmware and Application Files

RSTi-OM User Manual Section 4
GFK-3212A Jun 2021
Updating the IOLM Firmware and Application Files 43
Section 4: Updating the IOLM Firmware and
Application Files
This section provides an overview of the software images (firmware) and applications on the IOLM. In
addition, it contains procedures to update images (Section 4.2.1) and application sub-assemblies
(Section0).
After verifying that the IOLM contains the latest software, the next step is to configure the port
characteristics using the instructions in Section 3: Configuring the IOLM with PAC Machine Edition.
4.1 Images (firmware) and Application Sub-Assemblies
Overview
The IOLM is loaded with the latest images (firmware) at the factory but you may need to update
images or application sub-assemblies to have access to the latest features. You can view all image and
application versions on the IOLM ADVANCED | Software page.
Figure 36: Advanced Settings