RSTi-OM User Manual Section 4
GFK-3212A Jun 2021
Updating the IOLM Firmware and Application Files 47
4.2.2 Updating Application Subassemblies
Use this procedure to upload applications using the Software page.
1. Download the latest application from the Emerson website.
2. Open your browser and enter the IP address of the IOLM.
3. Click Advanced and SOFTWARE.
4. Click the Browse button under Update Application navigate to the file location, highlight the
application, and click Open.
5. Click the Install button.
Figure 38: Installation
6. Click the CONTINUE button to the Update Application message.
7. Click OK to close the Update Application Successful message.
To Next Page
Loading...
