Emerson RSTi-OM - Edit OPC UA Settings

RSTi-OM User Manual Section 6
GFK-3212A Jun 2021
IO-Link Master Port Configuration
65
6.5.1 Edit OPC UA Settings
You can use this procedure to edit OPC UA settings.
1. If necessary, open the IO-Link Master web interface with your web browser using the IP
address.
2. Click Configuration | OPC UA.
3. Click the EDIT button.
Figure 46: OPC UA Settings
1. Make the appropriate selections for your environment. You can use the help system if you
require definitions or values for the options or 6.5.2 OPC UA Settings Parameters.
2. Click the SAVE button.