13
Clock Operation
Setting The Date And Time
Note: The month and date are displayed numerically (MM/DD).
For example, February 28
th
is displayed as “2 28”.
1.) Press the MODE button four times. The Month
display appears.
2.) Press the SET button repeatedly to advance the display to the correct month.
3.) Press the MODE button again. The Day display
appears.
4.) Press the SET button repeatedly to advance the display to the correct day.
5.) Press the MODE button again. The Hour
display appears together with either the “A”
(AM), “P” (PM), or “H” (24 Hour format)
indicator.
6.) Press the SET button repeatedly to advance the display to the correct hour,
AM “A” or PM “P”.
7.) Press the MODE button again. The Minutes
display appears.
8.) Press the SET button repeatedly to advance the display to the correct minute.
9.) Press the MODE button once more, then press
the SET button. The clock begins to run.
RP3228_030205.p65 2/3/2005, 10:3313
To Next Page
Loading...