Emerson unidrive m200 - Page 275

Trip t156
Value 156
Short description
This trip is not used by the drive and can be used for a user trip.
Trip t157
Value 157
Short description
This trip is not used by the drive and can be used for a user trip.
Trip t158
Value 158
Short description
This trip is not used by the drive and can be used for a user trip.
Trip t159
Value 159
Short description
This trip is not used by the drive and can be used for a user trip.
Trip t160
Value 160
Short description
This trip is not used by the drive and can be used for a user trip.
Trip t161
Value 161
Short description
This trip is not used by the drive and can be used for a user trip.
Trip t162
Value 162
Short description
This trip is not used by the drive and can be used for a user trip.
Trip t163
Value 163
Short description
This trip is not used by the drive and can be used for a user trip.
Trip t164
Value 164
Short description
This trip is not used by the drive and can be used for a user trip.
Trip t165
Value 165
Short description
This trip is not used by the drive and can be used for a user trip.
Trip t166
Value 166
Short description
This trip is not used by the drive and can be used for a user trip.
Trip t167
Value 167
Short description
This trip is not used by the drive and can be used for a user trip.
Trip th
Value 24
Short description Motor thermistor over temperature
This trip indicates that the motor thermistor has indicated a motor over-temperature.
If Digitalinput5mode (08.035) is 1 or 2 then a Thermistor trip is initiated if the feedback value is higher than ThermistorTripThreshold (07.048).
Recommended actions:
Check motor temperature.
Check thermistor continuity.
Trip TH.fb
Value 218
Short description Internal temperature monitoring fault
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10
275