Emerson Unidrive M700 - Page 101

SI-Ethernet User Guide 101
Issue: 1
Safety
information
Introduction
Mechanical
installation
Electrical
installation
Getting started Parameters
Key features
and Protocols
PC Applications Security Diagnostics
Glossary of
terms
Index
This parameter defines the customised vendor ID.
This parameter defines a custom product type value which is used to identify the
product on the network.
This parameter defines a custom product revision value which is used to identify the
product on the network.
S.20.030 Custom Vendor ID
Minimum 0 Maximum 1
Default 0 Units
Type 8 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/
IP interface enable
Display Format None Decimal Places 0
Coding RW, TE, BU
Value Text Description
0 257 - CT EtherNet/IP interface
1 553 - CT AMERICA EtherNet/IP America interface
S.20.031 Custom product code
Minimum 0 Maximum 65535
Default 0 Units
Type 16 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/
IP interface enable
Display Format None Decimal Places 0
Coding RW, BU
S.20.032 Custom product revision code
Minimum 0 Maximum 65535
Default 0 Units
Type 16 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/
IP interface enable
Display Format None Decimal Places 0
Coding RW, BU