Emerson Unidrive M700 - Page 102

102 SI-Ethernet User Guide
Issue: 1
This parameter defines the actual product code.
This parameter defines the actual revision number.
This parameter defines the type of motor 1.
S.20.033 Actual product code
Minimum 0 Maximum 65535
Default 0 Units
Type 16 Bit Volatile Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/
IP interface enable
Display Format None Decimal Places 0
Coding RO, NC, PT, BU
S.20.034 Actual product revision
Minimum 0 Maximum 65535
Default 0 Units
Type 16 Bit Volatile Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/
IP interface enable
Display Format None Decimal Places 0
Coding RO, NC, PT, BU
S.20.040 Type of motor 1
Minimum 0 Maximum 4
Default 2 Units
Type 8 Bit User Save Update Rate Reset
Display Format None Decimal Places 0
Coding RO, TE, PT, BU
Value Text Description
0 2-FC DC FC DC Motor
1 6-WRI Wound Rotor Induction Motor
2 7-SCI Squirrel Cage Induction Motor
3 9-Sin PM BL Sinusoidal PM BL Motor
4 10-Trap PM BL Trapezoidal PM BL Motor