SI-Ethernet User Guide 25
Issue: 1
Safety
information
Introduction
Mechanical
installation
Electrical
installation
Getting started Parameters
Key features
and Protocols
PC Applications Security Diagnostics
Glossary of
terms
Index
10.029 Tx2 Link
St
a
tus
VLAN disabled (-30),
Reserved 29 (-29),
Reserved 28 (-28),
Reserved 27 (-27),
Reserved 26 (-26),
Reserved 25 (-25),
Reserved 24 (-24),
Reserved 23 (-23),
Reserved 22 (-22),
SYNC unsupported (-21),
MEC offset (-20),
Invalid tx rate (-19),
Too many mapping (-18),
Link busy (-17),
Invalid profile (-16),
Invalid mapping (-15),
Read only param (-14),
Msg mismatch (-13),
Msg too long (-12),
Attrib NA (-11),
Attrib RO (-10),
Attrib missing (-9),
Timeout (-8),
In error (-7),
Link num in use (-6),
Not editable (-5),
Invalid link num (-4),
Invalid args (-3),
Too many links (-2),
Out of memory (-1),
OK (0),
Not running (1),
OK sync (2)
OK
(0)
RO Txt
10.030 Tx3 Link Profile Std (0), Sync (1) Std (0) RW Txt US
10.031 Tx3 Link Number 0 to 255 0 RW Num US
10.032
Tx3 Source
Parameter
0.00.000 to 4.99.999 0.00.000 RW SMP PT US
10.033
Tx3 Parameter
Count
0 to 10 0 RW Num US
10.034
Tx3 Link
Transmission
Type
Unicast (0),
Broadcast (1),
Multicast1 (2),
Multicast2 (3),
Multicast3 (4),
Multicast4 (5)
Unicast (0) RW Txt US
10.035
Tx3 Destination
Address
0.0.0.0 to
255.255.255.255
0.0.0.0 RW IP US
10.036 Tx3 Message Rate 0 to 100 ms 0 ms RW Num US
Parameter Range Default Type
To Next Page
Loading...
