Emerson Vilter VSS - Page 245

7. Quickly press and release the blue button on the ac-
tuator again. The red LED will now ash at a slower
rate, indicating that the minimum slide valve position
(zero position) has been set.
8. Use the increase button on the calibration tool to
drive the slide to its maximum “mechanical stop” po-
sition. Release the increase button when the slowing
of the motor rotation and a winding sound from the
actuator motor is noted.
9. Press and hold down on the photo-chopper shaft to
disengage the brake slowly, releasing tension from
the motor mount. Use the decrease button to pulse
the actuator to where the slide is just off of its me-
chanical stop and there is no tension on the motor
shaft.
10. Quickly press and release the blue button on the ac-
tuator one more time. The red LED will stop ash-
ing. The actuator is now calibrated and knows the
minimum and maximum positions of the slide valve
it controls.
11. Disconnect the calibration tool’s turck from the ac-
tuator, and connect the motor control cable on the
actuator (connector J2).
Compressor Model
Number
Capacity
Slide Valve
Volume
Slide Valve
151 VSM / VSG CW CW
152 VSM / VSG CW CW
181 VSM / VSG CW CW
182 VSM / VSG CW CW
201 VSM / VSG CW CW
202 VSM / VSG CW CW
291 VSS / VSSH / VSSG CW CW
301 VSM / VSG CW CW
341 VSS / VSSH / VSSG CW CW
361 VSM / VSG CW CW
401 VSM / VSG CW CW
451 VSS / VSSH / VSSG CW CW
501 VSM / VSG CCW CCW
601 VSM / VSG CCW CCW
601 VSS / VSSH / VSSG CW CW
701 VSM / VSG CCW CCW
751 VSS / VSG CCW CCW
791 VSS/VSH/VSG CCW CCW
891 VSS/VSH/VSG CCW CCW
901 VSS / VSG CCW CCW
1051 VSS / VSH / VSG CCW CCW
1201 VSS / VSH / VSG CCW CCW
1301 VSS / VSH / VSG CCW CCW
1501 VSS / VSG CCW CCW
1551 VSS / VSG CCW CCW
1801 VSS / VSG CCW CCW
1851 VSS / VSG CCW CCW
2101 VSS / VSG CCW CCW
2401 VSS / VSG CCW CCW
2601 VSS / VSG CCW CCW
2801 VSS / VSG CCW CCW
3001 VSS / VSG CCW CCW
Order Vilter Slide Valve Calibration Tool Using VPN
75002
General Inquiries
5555 S. Packard Ave.
Cudahy, WI 53110
United States
Phone: 414-744-0111
Fax: 414-744-3483
Web: www.Vilter.com
Customer Service
Phone: 1-800-862-2677
Service.Vilter@emerson.com
Parts
Parts.Vilter@Emerson.com
For more product informa-
tion and to order online visit:
VPI.Emerson.com
Slide Valve Increase Direction
for Single Screw Compressors Table
F − 3
VSS/VSM/VSH/VSSH • Installation, Operation and Maintenance Manual • Emerson • 35391SD
Appendix F • Hand-Held Slide Valve Calibration Tool